Ahmad was born in east Azarbaijan of Iran (Marand city) in 1967. He grew up there and went to study mechanical engineering after completing high school at Tabriz University and received B. Sc degree in 1991. He worked in pipe and rolling industrial group (Steel pipe and profile manufacturing company) as a master design engineer and head of engineering department, respectively. He is a master engineer in power train department of Zamyad Company and runs some projects regarding development of vehicle’s power train system. He received M. Sc degree in mechanical engineering (solid mechanics) from Karaj branch of Islamic Azad university in 2010. He is very interest to research works and pursue his research works on the static, dynamic and thermo-magneto- elasticity analysis of structures fabricated from advanced composite materials (Functionally graded (FG) materials, FG Porous materials, Auxetic FG materials) under compound loads. He published more than 12 papers in these fields. He cooperates with some famous journals as a reviewer.
Name: Ahmad Surname: Behravan Rad Date of birth: 1, 12, 1967 Marital Status: Married Place of birth: Marand / IRAN Location: Tehran / IRAN
- B.Sc., Mechanical Engineering, 1991, Tabriz University, Iran.
- M.Sc., Applied Mechanics, 2010, Karaj University, Iran.
- Analysis of structures fabricated from functionally graded materials (FGMs) and functionally graded porous materials (FGPM) under static, dynamic, thermal loads and magnetic actuation based on 3D theory of elasticity.
- Using semi-analytical method (State space – differential quadrature rule) for analysis of above mentioned structures.
- Design / fabrication of novel composite materials (FGM, FGPM) for use in industry and Bio-engineering.
- Applications of functionally graded materials in internal combustion engines.
- Modeling and analysis of structures under the effect of multiphysic interactions.
- Sc. thesis title: Conversion of full automatic rotating disk Saw machine gearbox from mechanical system to full hydraulic system.
- Sc. thesis title: Static analysis of functionally graded circular plates resting on elastic foundation by differential quadrature method (DQM)
- Behravan Rad A., Majd K. M., Static analysis of non-uniform 2D porous FGM circular plate supported by a gradient hybrid foundation including friction force, Latin American journal of Solids and structures, in review.
- Behravan Rad A., Shariyat M., Magneto-thermo-elastic behavior of non-uniform functionally graded circular plate resting on a gradient hybrid foundation under compound loads, Archive of Civil and Mechanical Engineering Journal, 2016, 16(3), 447-466.
- Behravan Rad A., Shariyat M., Three-dimensional magneto-elastic analysis of asymmetric variable thickness porous FGM circular plates with non-uniform tractions and Kerr elastic foundations, Composite Structures, 2015, 125, 558-574.
- Behravan Rad A., Magneto-elastic analysis of non-uniform functionally graded circular plate resting on a radially graded hybrid foundation, Applied Mathematic & Computations, under review, 2015.
- Behravan Rad A., Thermo-elastic analysis of functionally graded circular plates resting on a gradient hybrid foundation, Applied Mathematic & Computations, 2015, 256, 276-298.
- Behravan Rad A., Thermo-elastic analysis of non-uniform functionally graded circular plate resting on a gradient elastic foundation, of Solid Mechanics, Accepted, 2015.
- Behravan Rad A., Mohammadi Majd , 3D elasticity solution for the static analysis of variable thickness bi-directional functionally graded circular plates subjected to non-uniform asymmetric boundary conditions, Int. J. of Engineering & Applied Science, 2014, 6(3), 52-74.
- Behravan Rad A., Alibeigloo A., Semi-Analytical Solution for the Static Analysis of 2D Functionally Graded Solid and Annular Circular Plates Resting on Elastic Foundation, Mechanics of Advanced Materials & Structures, 2013, 20, 515-528.
- Behravan Rad A., Shariyat M., A three-dimensional elasticity solution for two-directional FGM annular plates with non-uniform elastic foundations subjected to normal and shear tractions, Acta Mechanica Solida Cinica, 2013, 26(6), 671-690.
- Behravan Rad A., Static response of 2-D functionally graded circular plate with gradient thickness and elastic foundations to compound loads, Structural Engineering & Mechanics, 2012, 44(2), 139-161.
- Behravan Rad A., Semi-analytical solution for functionally graded solid circular and annular plates resting on elastic foundations subjected to axisymmetric transverse loading, Advances in Applied Mathematic & Mechanics, 2012, 4(2), 205-222.
- Behravan Rad A., Static analysis of two directional functionally graded circular plate under combined axisymmetric boundary conditions, J. of Engineering & Applied Science, 2012, 4(3), 36-48.
- Behravan Rad A., On The Static Response of Functionally Graded Circular Plate Resting on Linearly Gradient Elastic Foundations Subjected to Combined Axisymmetric Transverse and Shear Loads, ISAAMMIT-11, 2011, Baku, Azerbaijan.
- Behravan Rad A., Alibeigloo A., Malihi S. S., Static Analysis of Functionally Graded Annular Plate Resting on Elastic Foundation Subject to an Axisymmetric Transverse Load, based on the three dimensional theory of elasticity, J. of Solid Mechanics, 2010, 2(3), 290-304.
- Malihi S. S., Behravan Rad A., Nazari F., Semi-analytical solution for the static analysis of functionally graded beams resting on two parameter elastic foundation, J. of Engineering & Applied Science, 2010, 2(3), 26-39.
- Journal of Mechanical Science and Technology (Publisher: Springer).
- Structural Engineering & Mechanics, International Journal (Publisher: Techno press).
- International Journal of Aerospace and Lightweight Structures (IJALS).
- Journal of vibration and control (Publisher: SAGE).
- International Journal of Acoustic and vibration.
- Latin American Journal of Solids and Structures.
- Journal of Solid Mechanics (Publisher: Islamic Azad University Arak Branch)
- Special Topics & Reviews in Porous Media – An International Journal (Publisher: begellhouse).
- Wind & Structures (Publisher: Techno press).
- International Journal of Mechanical Science (Publisher: Elsevier).
- 2015 Global Conference on Polymer and Composite Materials (PCM 2015)
21 years useful engineering experience as follows:
1-Seven years at Tube and profile industry, Three years as a design engineer and Four years head of engineering design and machine construction division.
2- Fourteen years as a research engineer (Power Train Expert) at vehicle manufacturing company.
- Design and making of slitter lines, capacity 20 ton, line velocity 60 m/min.
- Design and making of Tube mill lines, tubes diameter from 0.5 inch to 3 inch, line velocity 120 m/min.
- Design and fabricating of reduction gear-boxes from 2KW –130KW.
- Design of roll forming dies for production of tubes and reshaping forms (squares, profiles ….)
- Design and making kinds of cranes from 5ton – 50ton with 18- 36m span
- Design and making hydraulic press (20 ton) for testing of tubes
- Design roll de coiler and re coiler for strip galvanizing factory (at different capacities)
- Co-designer of tube finishing machines including of Facing and Hydrostatic testing machines
- Making tube straightening machine (six rolls)
- Making mechanical equipments of tube galvanizing factory (production capacity: 30 000 ton/year)
- Design of hot galvanizing furnace (850 ) with cooperation of consultant engineer.
- Design of roll form dies for reshaping of thick copper tubes (diameter 80mm , thick 10mm & diameter 225 mm , thick 12 mm & diameter 314 mm , thick 18 mm)
- Work on automation of production line project at vehicle manufacturing company as a study project.
- Work on energy management project at vehicle manufacturing company as a study project.
- Facility planning and production line design for manufacturing Bus & Minibus.
- To draw up manufacturing process for producing above mentioned vehicles.
- Design a machine for reshaping thick Copper Tubes to squares by roll forming method
- Design a machine for reshaping thick Copper Tubes to squares by drawing method
- Design fuel , exhaust system , high pressure CNG circuit for new Pick up
- Drive-ability analysis of new products (Vehicles) by means GTSUIT software.
- Familiar to design of hydraulic circuits for machineries
- Passing energy management training course at Iranian Institute for energy studies
- Passing advanced energy management (energy auditing) training course at Iranian Institute for Productivity & Human Resource Development.
- Passing gasoline fuel injection system training course for Nissan Pick-up vehicle (Bosch system).
- Auto cad
- Microsoft office ( Word , Excel , Power point )
- Catia, elementary level.
- Ansys (FEM software), elementary level.
- Matlab
What do celebrities say about Ahmed?
Ahmad Behravan Rad is an one of diligent researcher that I know!
He is a capable researcher. Friendship, Getting to know him and cooperation with him, It’s a great honor for me!
Previous
Next